How To Thread A Montgomery Ward URR 1930 Sewing Machine.
Learn how to thread your How To Thread Your Montgomery Ward Sewing Machine using this easy step-by-step tutorial.
Threading the Machine
NOTE : IF YOUR MACHINE IS NOT THREADED CORRECTLY, IT Will NOT SEW PROPERLY.
Turn the hand wheel toward you until the needle is raised to its highest position. Raise presser foot lifter. Place a sp0ol of thread on the spool pin. Refer to Figure 9 for identification of parts and proceed with upper threading as follows:
UPPER (NEEDLE) THREAD
1. Slip thread under and up into rear thread guide ; bring thread forward over the arm and through front thread guide in the same manner.
2. Draw the thread down around and between the tension discs from right to left.
3. Bring the thread all the way to the right and hook the thread over the top of the check spring from right to left.
4. Pull the thread under the large thread guide and up to the thread take-up lever.
5. Insert the thread through the hole m the take-up lever from right to left.
6. Draw the thread down through the lower thread guide· and the needle bar thread guide.
7. Pass the thread through the eye of the needle from front to rear. Draw about 3 inches of thread through the needle. This length is necessary to begin sewing.
We have additional Montgomery Ward user – owner manuals available in our shop.
Please feel free to contact us if you have any questions about this manual.
You can view these manuals on your device or download the manual to save or print as well.
PDF download
You can get the complete instruction manual here.
Includes: Adjusting tensions, bobbin winding, changing needles, remove and replace bobbin case, zigzag, programming stitches, and much more.