Sewing machine threading instruction

 

 

New Home NH60 Sewing Machine Threading Instructions.

 

Threading Instructions

Raise the presser foot. Press the needle up/down button (1) to raise the thread take-up lever to its highest position.

1. Draw the end of the thread around the upper thread guide.

2. While holding the thread near the spool (2), draw the end of the thread down around the check spring holder (3).
(2) Spool   (3) Check spring holder.

3. Firmly draw the thread up from right to left over the take-up lever, and down into the take-up lever eye..

4. Pass the thread through the lower thread guide. Slide the thread behind the needle bar thread guide on the left.

5. Thread the needle from front to back, or use the needle threader.

NOTE: You may want to cut the end of thread with sharp scissors for easier needle threading.

 

New Home NH60 Sewing Machine Threading Instructions

You can find the complete instruction manual here.

 

 

Kenmore 385.1584180 Sewing Machine Threading Instructions.

 

Threading Instructions

Raise take-up lever to its highest position by turn mg hand wheel toward you.

Raise presser foot lever.

Place spool on spool pin as shown, with thread coming from the back of the spool.

1. Draw thread into thread guide using both hands.

2. While holding thread near spool, draw thread down into the tension area and then around the check spring holder.

3. Firmly draw thread up and through take-up lever from right to left.

4. Draw thread down and slip it through the thread guide.

5. Thread then is slipped into needle bar thread guide.

6. Thread needle from front to back.

NOTE: You may want to cut the end of thread with sharp scissors for easier needle threading.

 

Kenmore 385.1584180 Sewing Machine Threading Instructions

You can find the complete instruction manual here.

 

 

Singer 353 354 Genie Sewing Machine Threading Instructions.

 

Threading Instructions

Raise the presser foot lever.

Turn hand wheel toward you to raise needle to its highest point.

Place spool on spool pin over felt and lead through all threading points.

Thread needle from front to back.

Draw about 3 inches of thread through the eye of the needle.

 

Singer 353 354 Genie Sewing Machine Threading Instructions

You can find the complete instruction manual here.

 

 

Janome TS1718 Sewing Machine Threading Instructions.

 

Threading Instructions

Raise the presser foot lever.

Raise take-up lever to its highest position by turning balance wheel toward you.

Place spool on spool pin as shown with thread coming from the back of the spool.

1. Draw thread into thread guide using both hands.

2. While holding thread near spool. draw thread down into the tension area and then around the check spring holder.

3. Firmly draw thread up and through take-up lever from right to left.

4. Draw thread down and slip it into needle bar thread guide.

5. Thread needle eye from front to back.

NOTE: You may want to cut the end of thread with sharp scissors for easier needle threading.

 

Janome TS1718 Sewing Machine Threading Instructions

 
TS 1718

You can find the complete instruction manual here.

 

 

Brother XL2010 Sewing Machine Threading Instructions.

 

Threading Instructions

1) Raise the presser foot lever.

2) Raise the needle to its highest position by turning the balance wheel toward you.

3) Place a thread spool on horizontal spool pin.

4) Choose an appropriate spool holder according to type and diameter of spool being used.
(The diameter of spool holder should be larger then that of the spool itself).

5) Press the spool holder firmly to the spool.

6) Deliver the upper thread as illustrated.

7) Make sure to guide the thread through thread-take-up lever from right to left.

 

Brother XL2010 Sewing Machine Threading Instructions

 

You can find the complete instruction manual here.