How To Thread A Bernina Artista 180 Sewing Machine.
Learn how to thread your Bernina Artista 180 sewing machine in this easy step-by-step tutorial.
Threading the Machine
Attaching the thread spool
Raise the needle and presser foot
Turn the power switch to “0”.
Place the spool on the pin.
Attach the appropriate spool disc: diameter of spool = disc size.
Threading the upper thread
Take the thread through rear guide A, then into the slit of the upper thread tension.
Down
Pull the thread down to the right of the take-up cover to B.
Up
Take the thread up to the left of the cover to C in the direction of the arrow, placing it in the
take-up lever.
Down
Take the thread down and through guides D and E.
• Needle threader
1) Raise the presser foot Hold the needle thread lightly with your left hand and turning the handwheel counterclockwise, toward you, for one complete turn.
2) Bring the bobbin thread up by pulling the needle thread up.
3) Pull both threads under and to the back of the presser foot, leaving 10 cm to 15 cm ( 4 to 6 inches) of thread clear.
• Bringing up the lower thread
If bobbin thread is cut on the cutter (page 8), there is no need to bring it up
Hold the upper thread.
Sew one stitch.
Pull the upper thread to bring the lower thread up through the stitch plate hole.
Take both threads through the slit on the presser foot to the back.
Pull threads over the cutter.
Note:
The bobbin thread must be brought up through the stitch plate for certain types of work.
The length of thread is sufficient for most normal work if the lower thread cutter has been used.
You can find additional Bernina user and owner manuals in our shop. Please feel free to contact us regarding this manual.
You can view these manuals on your device or download the manual to save or print as well.
You can get the complete instruction manual here. Includes: Adjusting tensions, bobbin winding, changing needles, remove and replace bobbin case, zigzag, programming stitches, and much more.
Thread a Bernina sewing machine.