How To Thread A Janome 9900 Sewing Machine

How To Thread A Janome 9900 Sewing Machine.

 

Learn how to thread your Janome 9900 Sewing Machine using this easy step-by-step tutorial.

 

Threading the Machine

NOTE : IF YOUR MACHINE IS NOT THREADED CORRECTLY, IT WILL NOT SEW PROPERLY.

Press the needle up/down button to raise the take-up lever
to the highest position.
Press the lockout key to lockout the machine. Raise the
presser foot.(1) Lockout key

Pass the thread in order from 1 to 7.

 

(1) Hold the thread with both hands and pass the thread
into the guide slot.
(B) Guide slot

(2) Hold the thread with both hands and draw the thread
around the corner of the guide.
Firmly pull the thread toward you along the right
channel until the thread snaps.
(B) Corner of the guide
(C) Right channel

(3) Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
(B) Right channel
(C) Thread guide plate
(D) Left channel

(4) While holding the thread at the spool, firmly draw the
thread up and to the back of the take-up lever. Draw
the thread forward to draw it into the eye of the take-up
lever.
(A) Eye of the take-up lever

(5) Then pull the thread down along the left channel
and through the lower thread guide.
(A) Lower thread guide

(6) Slide the thread behind the needle bar thread guide
from the left.
(A) Needle bar thread guide

(7) Thread the needle with the needle threader (refer to
the next page).

 

We have additional Janome user – owner manuals available in our shop.

Please feel free to contact us if you have any questions about this manual.

You can view these manuals on your device or download the manual to save or print as well.

 

PDF download

 

You can get the complete instruction manual here.

Includes: Adjusting tensions, bobbin winding, changing needles, remove and replace bobbin case, zigzag, programming stitches, and much more.

 

How To Thread A Janome 9900 Sewing Machine.

Janome 9900 Memory Craft

Leave a Comment