Janome JD1822 Sewing Machine Threading Instructions.
Threading Your Machine.
Raise take-up lever to its highest position by turning balance wheel toward you.
Raise presser foot.
Place spool on spool pin as shown, with thread coming from the back of the spool.
1. Draw thread into thread guide using both hands.
2. While holding thread near spool, draw thread down into the tension area and
then around the check spring holder.
3. Firmly draw thread up and through take-up lever from right to left.
4. Then draw thread down and slip it into the lower thread guide.
5. Draw thread down and slip it into needle bar thread guide.
6. Thread needle eye from front to back.
NOTE: You may want to cut the end of thread with sharp scissors for easier needle threading.
Janome JD1822 Sewing Machine Threading Instructions
You can find the complete instruction manual here.
JD 1822
Janome/New Home