Bernina 830 Sewing Machine Instruction Manual

Description

Bernina 830 Sewing Machine Instruction Manual.

Includes:
Threading machine.
Bobbin winding.
Thread tensions adjustment.
Needle and thread table.
Changing presser feet.
Free-arm and flatbed table.
Knee control lifter.
Regulate stitch length and width.
Automatic patterns.
Embroidery with the automatic.
Decorative stitches.
Embroidery designs
Zigzag stitches.
Sewing on buttons.
How to avoid breakdowns.
Cleaning and oiling.
Much more!
64 pages of great information.

 

Bernina 830 instruction – Owner – User manual

A download link for your manual will be emailed to you.

 

You can find additional Bernina sewing guides in PDF download here – Bernina manuals.

 

Bernina Record 830 Sewing Machine Instruction Manual PDF

 

Here is a nice Bernina 830 Record Electronic machine here.

 

 

FAQS

How to avoid breakdowns? Included in your Bernina user guide.

Generally, most breakdowns are caused by incorrect handling of the machine.

If breakdowns do occur then examine whether:
a) The needle is inserted properly (the flat side of the needle must be at the back.
b) Check to see the correct needle is being used (see needle and thread table).
c) The machine is cleaned properly. Lift free arm cover plate and remove sewing lint.
d) The hook race is clean and oiled;
e) There are pieces of thread caught between the thread tension discs or under the bobbin case spring.
f) Hand wheel is secured properly.
g) Before starting to sew please always ensure that the marker of the button hole knob (21) is at position «O».

What if the thread breaks?

Check the following:
a) The thread is too tight.
b) Use of inferior needles (buy them preferably at a Bernina dealer).
c) Needle inserted wrongly. Flat side must be at the back;
d) The needle is blunt or crooked.
e) Poor quality or knotted thread. Thread has dried out due to long storage.
f) The needle plate hole is pitted by needle and needs re-polishing (bring the free arm cover plate to the authorized Bernina dealer).
g) Hook point is damaged (call authorized Bernina dealer).

 

What do I do if the needle breaks?

a) Needle clamp screw is not sufficiently tightened.
b) The material was withdrawn towards the operator and needle bent (fabric should always be withdrawn to the rear).
c) When sewing over thick- part material was pushed whilst the needle was still in, therefore it bent, touched the throat plate and broke.
d) When cheap cotton, irregularly twisted or even containing knots is used.

 

These hints and more information are included in your Bernina manual.

Bernina 830 sewing machine manual