Brother SQ9185 Sewing Machine Instruction Manual

Description

Brother SQ9185 Sewing Machine Instruction Manual.

Includes:
Threading machine.
Bobbin winding.
Replacing needle.
Operation buttons.
Changing presser feet.
Adjusting stitch length and width.
Patchwork (Crazy quilt) stitching.
Buttonhole sewing.
Decorative stitches.
Built-in stitches.
Zigzag.
Cleaning the race.
Troubleshooting.
Much more!

116 pages.

PDF Download

Great information in this complete user’s guide.

More Brother user and operation manuals available here.

 

Brother SQ9185 Sewing Machine Instruction Manual

brother sq9185 manual

 

Common Problems

Error message “E6” appears in the LCD

If the error message “E6” appears in the LCD with the
occurrence of one of the following symptoms, follow
the procedure below to solve the problem.
Symptom 1 : The machine rattles and then stops
just after sewing is started.
Symptom 2 : The upper thread is tangled, for
example, in the race, or fabric is
caught in the machine.
Symptom 3 : The needle breaks, or the needle
bends and thus hits the needle plate.
Symptom 4 : The fabric is not fed.

Symptom 1 : The machine rattles and then stops just after sewing is started.
■ Cause
• The upper thread is not threaded correctly.
• The thread take-up lever is not threaded.
* When the machine stops just after sewing is
started, the upper thread may not be threaded
correctly.
Note
● If the needle is not raised, the upper thread
cannot be threaded correctly. Be sure to
press the needle position button to raise the
needle before threading the upper thread.
■ Remedy
Thread the upper thread again correctly by
following the procedure below.
a Turn off the machine.
b If the thread is tangled, remove the tangled
thread.
• Refer to “Cleaning the race” (page 91) and
“Tangled thread on wrong side of the fabric”
(page 95).
c Remove the upper thread from the machine.