Janome 5024 Sewing Machine Threading Instructions.
Decor Excel ll
Singer 319 Sewing Machine Threading Instructions
Singer 319 Sewing Machine Threading Instructions.
Threading Instructions
Raise take-up lever 5 to its highest point.
Place thread on spool pin and hold with right hand.
Lead thread into self-threading guide 1 from under side,
Down and from right to left behind or in front of center
tension disc 2 (Center disc separates threads for twin needle sewing.)
Into the loop of the take-up spring 3,
Under the slack thread regulator 4,
Up and from right to left through hole in take-up lever 5,
Down through guides 6 and 7 on face plate,
Into guide 8 on needle clamp,
From front to hack through eye of needle 9.
Draw about two inches of thread through eye of needle with which to start sewing.
Note: You may want to cut the end of thread with sharp scissors for easier needle threading.
Singer 319 Sewing Machine Threading Instructions.
Swing needle automatic.
Janome HD1000 Sewing Machine Threading Instructions
Janome HD1000 Sewing Machine Threading Instructions.
Threading Instructions
* Raise the thread take-up lever to its highest position by turning the handwheel counter clockwise.
Raise the presser foot lifter.
Place a spool on the spool pin, with thread coming off as shown.
1) Pass the thread through the top cover thread guide.
2) Draw the end of thread around the upper thread guide.
3) While holding the thread near the spool, draw the end of the thread down around the check spring holder.
4) Firmly draw the thread up and from left to right over the take-up lever then down into the take-up lever eye.
5) Then down through the lower thread guides.
6) Slide the thread behind the needle bar thread guide on the left.
7) Thread the needle from front to back.
Note: You may want to cut the end of thread with sharp scissors for easier needle threading.
Janome HD1000 Sewing Machine Threading Instructions
Kenmore 385.17627 Sewing Machine Threading Instructions
Kenmore 385.17627 Sewing Machine Threading Instructions.
Covers models 385.17627 – 385.17630.
Threading Instructions
Raise the thread take-up lever to its highest position by turning the handwheel counterclockwise
Raise the presser foot lifter.
Place a spool on the spool pin, with thread coming off as shown .
1) Draw the end of thread around the upper thread guide.
2) While holding the thread near the spool, draw the end of the thread down around the check spring holder.
3) Firmly draw the thread up from right to left over the take-up lever and down into the take-up lever eye.
4) Slide the thread behind the needle bar thread guide on the left.
5) Thread the needle from front to back or use a needle threader.
Note: You may want to cut the end of thread with sharp scissors for easier needle threading.
Kenmore 385.17627 – 385.17630 Sewing Machine Threading Instructions
Singer 900 Futura Sewing Machine Threading Instructions
Singer 900 Futura Sewing Machine Threading Instructions.
Threading Instructions
1. Raise take-up lever to its highest position by turning the hand wheel toward you. Raise presser foot to release the tension discs.
2. Lead thread from spool holder and snap it down into guidepost eyelet.
3. Raise console cover and lead thread through all points shown, making sure to:
• Hold thread under finger as shown and draw it between tension discs, down right hand channel, up left-hand channel, and into self-threading take-up lever.
• Thread take-up lever by guiding thread down over top of lever and then up into eyelet.
• Lead thread from take-up lever down into left channel and then into lower thread guides.
• Thread needle from front to back, drawing about four inches of thread through eye of needle.