Elna 830 Expressive Sewing Machine Threading Instructions.
Elna 830 Expressive Sewing Machine Threading Instructions
Note: Before starting, ensure that the machine is turned off and unplugged for safety.
Threading the Machine:
Raise the presser foot lifter
Press the lockout key to lockout the machine
Turn the handwheel toward you to raise the needle at its highest position.
(Fig 1) Lockout key
Pass the thread in order from (1 to 7)
.
1. Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the slit of the pre-tension thread guide. (Fig 2)
Note: Before starting, ensure that the machine is turned off and unplugged for safety.
Threading the Machine:
Raise the presser foot lifter
Press the lockout key to lockout the machine
Turn the handwheel toward you to raise the needle at its highest position.
(Fig 1) Lockout key
Pass the thread in order from (1 to 7)
.
1. Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the slit of the pre-tension thread guide. (Fig 2)
Threading the Machine:
Raise the presser foot lifter
Press the lockout key to lockout the machine
Turn the handwheel toward you to raise the needle at its highest position.
(Fig 1) Lockout key
Pass the thread in order from (1 to 7)
.
1. Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the slit of the pre-tension thread guide. (Fig 2)
2. Wind the thread around the pre-tension thread guide once as shown.
Draw the thread around the corner of the upper thread guide.
Firmly pull the thread toward you along the right channel until the thread snaps.
(Fig 3) Pre-tension thread guide
(Fig 4) Upper thread guide
(Fig 5) Right channel.
NOTE:
If the thread slips out of the pre-tension thread guide
while sewing, wind the thread through the hole as
shown (Fig 6) when threading through the pre-tension
thread guide.
NOTE:
If the thread coming out from the needle eye is too
short alter auto thread cutting and skipped stitch
occurs, draw the thread through the pre-tension
thread guide as shown (Fig 7).
3. Draw the thread down along the right channel and around the bottom of the thread guide plate.
Pull the thread up along the left channel.
(Fig 5) Right channel
(Fig 8) Thread guide plate
(Fig 9 Left channel.
4. While holding the thread at the spool, firmly draw the thread up and to the back of the take-up lever.
Draw the thread forward to draw it into the eye of the take up lever.
(Fig 10) Eye of the take-up lever.
5. Then pull the thread down along the left channel and through the lower thread guide.
(Fig 11) Lower thread guide.
6. Slide the thread from the right of the needle bar thread guide to the left.
(Fig 12) Needle bar thread guide.
7. Thread the needle with the needle threader (refer to the next page).
Remember to consult the machine’s user manual for additional guidance and specific instructions related to your model. Happy sewing!
Elna 830 Expressive Sewing Machine Threading Instructions