How To Thread A Singer 750 Sewing Machine.
Learn how to thread your Singer 750 Sewing Machine using this easy step-by-step tutorial.
Threading the Machine
NOTE : IF YOUR MACHINE IS NOT THREADED CORRECTLY, IT WILL NOT SEW PROPERLY.
Spools of various sizes are held firmly on the horizontal spool pin with the spool holder.
Slip spool of thread onto spool pin and press holder firmly against spool so that thread unwinds from a stationary spool .
To hold small spools – press small end of holder against spool.
To hold large spools – press wide end of holder against spool .
(1) Turn hand wheel to raise take-up lever to its highest position, and raise presser toot to release the tension discs.
(2) Lead thread through all points as shown, making sure to :
a) Thread tension discs as illustrated .
b) Thread take-up lever from back to front, guiding thread down over top of lever and then up into eyelet .
Thread needle from front to back, drawing about four inches of thread through eye of needle.
For greater convenience in threading the needle, use the built-in needle threader (see next page for instructions).
You can find additional Singer user – owner manuals available in our shop.
Please feel free to contact us if you have any questions about this manual.
You can view these manuals on your device or download the manual to save or print as well.
PDF download
You can get the complete instruction manual here.
Includes: Adjusting tensions, bobbin winding, changing needles, remove and replace bobbin case, zigzag, programming stitches, and much more.