Necchi HD22 Sewing Machine Threading Instructions.
Necchi HD22 Sewing Machine Threading Instructions
Note: Before starting, ensure that the machine is turned off and unplugged for safety.
1. Bobbin Winding:
a. Place a spool of thread on the spool pin at the top-right corner of the machine.
b. Draw thread from spool. Pass the thread through the top cover thread guide.
c. Guide the thread around the bobbin winder thread guide.
d. Insert the thread through the hole in the bobbin, threading from the inside to the outside.
e. Put the bobbin on the bobbin winder spindle, and push it to the right.
f. While holding the handwheel with your left hand, turn the stop motion knob toward you with the right hand.
g. With the free end of the thread held in your hand, depress the foot control.
h. Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
i. Depress the foot control again. When the bobbin is fully wound, it will stop automatically.
j. Return the bobbin winder to its original position by moving the spindle to the left and cut the thread
k. Tighten the stop motion knob to engage clutch.
Threading the Upper Thread:
Take the spool pin holder and insert it into the hole at the top of the machine.
Raise the thread take-up lever to the highest point by turning the handwheel towards you.
Raise the presser foot with the presser foot lifter and pass the thread in the order from 1 to 8.
1. Pass the thread through the top cover thread guide.
2. Draw the thread around the thread guide and down into the tension.
3. Then down around the check spring holder.
4. Firmly draw the thread from left to right over the take-up lever and down into the take-up lever eye.
5-6. Then down through the lower thread guide.
7. Slide the thread behind the needle bar thread guide on the left.
8. Thread the needle from front to back.
3. Threading the Bobbin Case:
a. Open the hinged cover to access the bobbin case.
b. Insert the bobbin into the bobbin case, ensuring it rotates counterclockwise when pulled by the thread.
c. Pull the thread through the slit in the bobbin case, leaving a tail of thread.
d. Place the bobbin case into the machine, aligning the marks on the case with the markings inside the bobbin case area.
e. Close the hinged cover, making sure it clicks into place.
4. Final Steps:
a. Hold the upper thread and manually turn the handwheel toward you to lower the needle into the fabric.
b. Pull the upper thread slightly to bring up the bobbin thread.
c. Hold both threads together and pull them towards the back of the machine, under the presser foot.
d. Your Necchi HD22 Sewing Machine is now threaded and ready to sew!
Remember to consult the machine’s user manual for additional guidance and specific instructions related to your model. Happy sewing!
Necchi HD22 Sewing Machine Threading Instructions
Note: Before starting, ensure that the machine is turned off and unplugged for safety.
1. Bobbin Winding:
a. Place a spool of thread on the spool pin at the top-right corner of the machine.
b. Draw thread from spool. Pass the thread through the top cover thread guide.
c. Guide the thread around the bobbin winder thread guide.
d. Insert the thread through the hole in the bobbin, threading from the inside to the outside.
e. Put the bobbin on the bobbin winder spindle, and push it to the right.
f. While holding the handwheel with your left hand, turn the stop motion knob toward you with the right hand.
g. With the free end of the thread held in your hand, depress the foot control.
h. Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
i. Depress the foot control again. When the bobbin is fully wound, it will stop automatically.
j. Return the bobbin winder to its original position by moving the spindle to the left and cut the thread
k. Tighten the stop motion knob to engage clutch.
Threading the Upper Thread:
Take the spool pin holder and insert it into the hole at the top of the machine.
Raise the thread take-up lever to the highest point by turning the handwheel towards you.
Raise the presser foot with the presser foot lifter and pass the thread in the order from 1 to 8.
1. Pass the thread through the top cover thread guide.
2. Draw the thread around the thread guide and down into the tension.
3. Then down around the check spring holder.
4. Firmly draw the thread from left to right over the take-up lever and down into the take-up lever eye.
5-6. Then down through the lower thread guide.
7. Slide the thread behind the needle bar thread guide on the left.
8. Thread the needle from front to back.
3. Threading the Bobbin Case:
a. Open the hinged cover to access the bobbin case.
b. Insert the bobbin into the bobbin case, ensuring it rotates counterclockwise when pulled by the thread.
c. Pull the thread through the slit in the bobbin case, leaving a tail of thread.
d. Place the bobbin case into the machine, aligning the marks on the case with the markings inside the bobbin case area.
e. Close the hinged cover, making sure it clicks into place.
4. Final Steps:
a. Hold the upper thread and manually turn the handwheel toward you to lower the needle into the fabric.
b. Pull the upper thread slightly to bring up the bobbin thread.
c. Hold both threads together and pull them towards the back of the machine, under the presser foot.
d. Your Necchi HD22 Sewing Machine is now threaded and ready to sew!
Remember to consult the machine’s user manual for additional guidance and specific instructions related to your model. Happy sewing!
Necchi HD22 Sewing Machine Threading Instructions
1. Bobbin Winding:
a. Place a spool of thread on the spool pin at the top-right corner of the machine.
b. Draw thread from spool. Pass the thread through the top cover thread guide.
c. Guide the thread around the bobbin winder thread guide.
d. Insert the thread through the hole in the bobbin, threading from the inside to the outside.
e. Put the bobbin on the bobbin winder spindle, and push it to the right.
f. While holding the handwheel with your left hand, turn the stop motion knob toward you with the right hand.
g. With the free end of the thread held in your hand, depress the foot control.
h. Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
i. Depress the foot control again. When the bobbin is fully wound, it will stop automatically.
j. Return the bobbin winder to its original position by moving the spindle to the left and cut the thread
k. Tighten the stop motion knob to engage clutch.
Threading the Upper Thread:
Take the spool pin holder and insert it into the hole at the top of the machine.
Raise the thread take-up lever to the highest point by turning the handwheel towards you.
Raise the presser foot with the presser foot lifter and pass the thread in the order from 1 to 8.
1. Pass the thread through the top cover thread guide.
2. Draw the thread around the thread guide and down into the tension.
3. Then down around the check spring holder.
4. Firmly draw the thread from left to right over the take-up lever and down into the take-up lever eye.
5-6. Then down through the lower thread guide.
7. Slide the thread behind the needle bar thread guide on the left.
8. Thread the needle from front to back.
3. Threading the Bobbin Case:
a. Open the hinged cover to access the bobbin case.
b. Insert the bobbin into the bobbin case, ensuring it rotates counterclockwise when pulled by the thread.
c. Pull the thread through the slit in the bobbin case, leaving a tail of thread.
d. Place the bobbin case into the machine, aligning the marks on the case with the markings inside the bobbin case area.
e. Close the hinged cover, making sure it clicks into place.
4. Final Steps:
a. Hold the upper thread and manually turn the handwheel toward you to lower the needle into the fabric.
b. Pull the upper thread slightly to bring up the bobbin thread.
c. Hold both threads together and pull them towards the back of the machine, under the presser foot.
d. Your Necchi HD22 Sewing Machine is now threaded and ready to sew!
Remember to consult the machine’s user manual for additional guidance and specific instructions related to your model. Happy sewing!
Necchi HD22 Sewing Machine Threading Instructions