Kenmore 158.17560 Sewing Machine Instruction Manual

$5.95

This is a download manual. Please check your email after purchasing.

SKU: 247 Category:

Description

Kenmore 158.17560 Sewing Machine Instruction Manual.

Includes:
Threading machine.
Bobbin winding.
Changing needle.
Thread tension adjustment.
Sewing light.
Threading needle.
Zipper insertion.
Buttonhole attachment.
Design cams.
Reverse stitch designs.
Special stitch dial.
Thread cutter.
Take-up lever.
Feed dog control.
Double needle.
Zigzag stitching.
Oiling.
Parts list.
Cleaning.
Much more!

56 page instruction/owners manual.

Great diagrams!

Kenmore 158.17560 Sewing Machine Instruction Manual.

Kenmore models:
158.1756
158.17560

 

Threading of top thread

Place thread on spool pin as shown with thread coming from the back of the spool.

Draw thread through the top thread guides.

Holding the spool stationary with the right hand, pull the ends of the thread between the tension discs as shown.

Pull the spring wire loop up and past the top of work until the thread can be slipped into the hook.

When the thread is released, the spring wire loop will return to position with thread and proper place.

Release spool of thread and continue to thread machine exactly as shown.

Needle must always be threaded in direction as shown in figure 3.

 

Winding the bobbin

1. Draw thread from spool through bobbin winder tension discs.
2. Wind thread around an empty bobbin several times.
3. Place bobbin onto bobbin winder shaft with thread wound on bobbin clockwise.
Push button winder latch against bobbin until it clicks.
4. Release clutch by turning the clutch knob towards you. Start Machine.
5. When bobbin is full, winding mechanism stops.
6. Tighten clutch knob and remove bobbin.

 

Threading the bobbin case

1. To remove bobbin from the shuttle, raise needle to its highest position.
Remove hand hole cover plate.

2. Pull open latch of bobbin case.

3. Pull bobbin case straight out of shuttle.

4. Insert bobbin into bobbin case making sure thread is coming from bobbin.

5. Pull thread through slot of case.

6. Pull thread under tension spring.

7. Holding latch open, position case into shuttle and release latch. Case should lock into place when latch is released.

8. Hold needle thread loosely in left hand and rotate handwheel towards you one complete turn. Bring bobbin thread up by pulling upper thread.

 

We carry more Kenmore sewing machine owners manuals in our shop here.