Janome 415 Sewing Machine Threading Instructions

 

 

Janome 415 Sewing Machine Threading Instructions.

 

Threading Instructions

Raise the take–up lever to its highest position by turning the handwheel toward you.

Raise the presser foot.

Place a spool on the spool pin as shown, with thread coming from back of the spool.

1) Draw the thread into thread guide using both hands.

2) While holding the thread near spool, draw thread down into the tension area and then around the check spring holder.

3) Firmly draw the thread up and through the take–up lever from right to left.

4) Then draw the thread down and slip it into the lower thread guide.

5) Draw the thread down and slip it into needle bar thread guide on the left.

6) Thread the needle eye from front to back.

* Refer to page 10 for the built-in needle threader.

Note: You may want to cut the end of thread with sharp scissors for easier needle threading.

You can find the complete instruction manual here.