Baby Lock BL5280E Sewing Machine Instruction Plus Service Manual

$6.99

This is a download manual. Please check your email after purchasing.

Description

Baby Lock BL5280E Sewing Machine Instruction Plus Service Manual.

Includes:
Setting up your machine.
Four-thread serging.
Presser foot adjustment.
Adjustable presser foot width.
Flatlock seams.
Serging curves.
Resetting narrow rolled edge.
Locking ends.
To clear stitch fingers.
Specialty thread guide.
Thread cutter.
Chart for tension adjustment.
Make stitch width narrower.
Replacing knives.
Troubleshooting.
Replacing light bulb.
Cleaning.
Much more!

34 pages instruction manual. Black & White

Also includes a small 8 page service manual with diagrams.

Please Note*
This manual does not cover differential feed.
That is a different manual. Your model is BL5280ENS.
This manual is for the BL5280E standard feed.
Please note that before purchasing.

 

 

Needle

Your Baby Lock serger is set up with a size 14 industrial sewing machine needle (Organ DC-1F) which is suitable for all light and medium and heavy weight fabrics.

For very lightweight fabric you will want to change to a size 11 needle.

The semi – ballpoint design of the industrial needle allows you to use the same needle for knits as well wovens.

It’s quality and strength are specifically designed for high-speed sewing.

An Industrial needle will give you perfect stitch formation through many hours of sewing.

 

 

Threading method 1 – Tying on

The fastest and easiest way to thread your Baby Lock is to cut off the unwanted thread and tie its end to the beginning of the new thread as follows:

1. Clip the existing thread just above it’s cone spool

2. Change threads and make a square knot to tie each old thread to its corresponding new thread. Figure 7

3. Clip the needle directly in front of the eye of the needle. It is not advisable to attempt to pull the not through the eye.

4. This may bend or break the needle. (Figure 8)

5. Separate the thread chain, discarding needle thread tail and gently pull the looper threads – individually – until each knot passes completely through the machine.

6. Pull the needle threads through in the same manner, and use the tweezers to re-thread the needles.

     Hint: As you pull each thread with your left hand, use your right hand to pull the tension disk rings forward slightly, making it easier for the not to pass through.

7. Place all  threads under and to the left of the presser foot: lower presser foot and sew a few stitches to start the chain.

 

Baby Lock BL5280E Sewing Machine Instruction Plus Service Manual

 

Baby Lock sewing machine manual