Kenmore 158.14300 – 158.14301 Sewing Machine Manual
$5.95
This is a download manual. Please check your email after purchasing.
Description
Kenmore 158.14300 – 158.14301 Sewing Machine Manual.
Includes:
Machine threading.
Changing needle.
Bobbin winding.
Thread tension adjustment.
Stitch width control.
Special stitch dial.
Feed dog control.
Buttonhole attachment.
Zigzag stitching.
Face cover plate.
Take-up lever.
Clutch knob.
Multi-purpose needle plate.
Feed dog control.
Zipper application.
Checking performance problems checklist.
Oiling your machine.
Cleaning.
Much more!
49 page instruction/owners manual.
Kenmore models:
158.1430
158.14300
158.14301
Kenmore 158.14300 – 158.14301 Sewing Machine Manual.
Starting To Sew Hints
Now that you are familiar with the controls on your machine and with the accessories provided for the machine, you are ready to start to sew with your new Kenmore sewing machine.
Below are some good habits to follow each time you sit down to sew:
1. Test the needle – it should be straight, properly set and sharp on the point. It should be the
correct size for the fabric and thread being used. Do not be afraid to change your needle
frequently. Many of the new fabrics made of synthetic blends tend to dull the needles
more easily than fabrics made of natural fibers.
2. Before placing the material on the machine, see that the ends of the threads have
been drawn about 4 inches to the rear of the machine. Hold on to threads during the
sewing of the first 3 or 4 stitches of the seam.
3. Test the machine stitch on a scrap of fabric you plan to use. The fabric should be
double thickness. Adjust the machine for the length of stitch and tension suitable to your
fabric.
4. Fabric should be placed under the presser foot with the bulk of the material to
the left of the needle and the right edge of the material placed on the 5/8″ seam marking on
the needle plate when making a simple seam.
5. Run the machine at a slow even speed. The more pressure you put on the speed control,
the faster the machine will sew.
6. Fasten each seam by back tacking at the beginning and end of the seam.
7. Always finish sewing each seam with the needle at its highest point.
8. Guide the fabric gently with your hand in front of the needle. Never pull or hold
the fabric in such a way that the normal feeding is altered.
9. When turning the hand wheel manually, always turn it toward you.