Singer 9614 Merritt Sewing Machine Instruction Manual
$4.99
This is a download manual. Please check your email after purchasing.
Description
Singer 9614 Merritt Sewing Machine Instruction Manual.
Includes:
Bobbin winding.
Four step buttonholing.
Sewing a seam.
Reverse stitching.
Machine threading.
Zipper insertion.
Setting selectors.
Adjusting stitch length.
Pattern chart.
Reverse stitch push button.
Telescopic spool pin.
Ric-Rac stitch.
Multi-stitch Zigzag.
Buttonhole and buttons.
Free-arm sewing.
Presser foot lifter.
Take-up lever.
Troubleshooting.
Cleaning.
Much more!
72 page complete instruction manual.
English, Spanish, French languages
Singer 9614 Merritt Sewing Machine Instruction Manual
The bobbin thread
Your sewing machine uses two threads to form a stitch. The upper thread comes from the spool and is threaded through the eye of the needle. The lower thread comes from the bobbin. Wind the bobbin before threading the Machine.
Winding the bobbin
Preparation steps
Raise the presser foot and turn hand wheel towards you until needle is at highest position.
Loosen hand wheel knob by turning it towards you with right hand while holding hand wheel with left hand.
Open slide plate and lift out bobbin.
Place spool pin felt on pin.
Winding steps
1. Place thread spool on spool pin with thread retaining slit on top. Break paper at the end of spool if necessary. If you are using a tube of thread affix spool pin extension to spool pin to ensure even flow of thread
2. Lead thread around bobbin winder tension disc and through small hole in bobbin from inside out.
3. Place bobbin on spindle and push bobbin to right to engage bobbin winder.
4. Hold thread end and start the machine. Cut off thread after a few coils have been wound.
5. When the required amount of thread has been wound (winding will stop when bobbin is full), stop the machine and cut connecting thread.
6. Push bobbin to left and remove bobbin from spindle.
7. Hold hand wheel and tighten hand wheel knob.