White 8410 Sewing Machine Instruction Manual

Description

White 8410 Sewing Machine Instruction Manual.

Includes:
Connecting the machine.
Bobbin winding.
Needle chart.
Zigzag stitching.
Buttonholes.
Machine threading.
Thread cutter.
Screw for edge guide.
Horizontal thread reel holder.
Thread tension adjustment.
Feed dog.
Push buttons for stitch selection.
Sewing light.
Reverse feed button.
Troubleshooting.
Cleaning.
Much more!

57 page instruction/owners manual.

White Euroflair 8410

White 8410 Sewing Machine Instruction Manual.

 

Fault-finding samples included:

Why haven’t I got the results I expected?

Very seldom does anything go wrong with this sewing machine. It is well constructed and can withstand very intensive use. Yes, generally it performs better the more it is used. However, below you will find some advice if, in spite of everything, you are not satisfied with your sewing results.

 

Always start by checking the needle 

An important part which needs to be changed from time to time is the needle. Always start with a new needle as soon as you discover that a seam is not what you expected. Test sew on a scrap of the fabric you are sewing. Read about needles on pages 16 and 17.
Check that you have chosen the correct needle and see that it is correctly inserted.

 

Unattractive stitches 

The thread tension is not correct. See page 13.
The machine may be incorrectly threaded. The correct threading is shown on page 10.
The needle, thread, and fabric do not correspond. See pages 16 and 17.
Wrong upper thread. It should be of the same thick­ness as the lower thread.
The bobbin was wrongly inserted in the bobbin case. See page 11.

 

The needle breaks

You may have helped the machine to feed by pulling the fabric. The needle can easily strike against the needle plate and break.

 

Incorrect pattern 

If the machine does not sew the pattern indicated by the symbol, it is possible that the electronics have been disturbed in some way, perhaps by a short power cut or electrical disturbance. Shut off the main switch, wait a few seconds and try again. If the fault remains, contact your dealer.

 

Machine runs sluggishly 

Dirt or lint has fastened under the needle plate. Loosen the needle plate and brush clean between the teeth of the feed dog. See page 47.
Dirt or lint has fastened in the hook. Remove the bobbin and bobbin case and clean with the brush. See page 47.

 

You can find additional White sewing machine manuals in our shop here.